Hoops for 19010 Elite Ergo 3 Embroidery Machine

Machine recommendations, tips, and techniques for embroidery machines.

Hoops for 19010 Elite Ergo 3 Embroidery Machine

New postby analacana on Wed Nov 17, 2010 6:48 pm

Hello, I have seen this group but have never participated.. Hi.. I have a Kenmore Elite 19010 Ergo 3 Embroidery Machine. I have had it for six or seven years. I am limited by the 4" by 4" hoop. Does anyone know if there is a larger hoop available for this machine?
analacana
 
Posts: 0
Joined: Wed Nov 17, 2010 6:33 pm

Re: Hoops for 19010 Elite Ergo 3 Embroidery Machine

New postby MartySews2 on Wed Nov 17, 2010 7:36 pm

I believe "Hoop-It-All" has some larger hoops that may fit your machine. Remember that your machine will only do a 4 x 4 design so any larger designs would need to be split. Janome hoops also may fit your machine since Janome makes the Kenmore line of machines. Hope this helps & welcome to the group.
Marty ;)
Brighten each corner where you are ... smile!
MartySews2
 
Posts: 3982
Joined: Mon Aug 13, 2007 7:28 am
Location: Memphis, TN

Re: Hoops for 19010 Elite Ergo 3 Embroidery Machine

New postby bridesmom on Wed Nov 17, 2010 7:39 pm

Welcome from me too! I had an older embroidery machine that was limited to a 4x4 design size, so when I bought my new machine I made sure I got as large a design area as I could afford so I could do the bigger designs, sure is nice not having to try splitting designs!
Laura
Go Canucks!
Asking a quilter to mend something is like asking Picasso to paint your garage
User avatar
bridesmom
2008/2009 Stash Challenge Winner
2008/2009 Stash Challenge Winner
 
Posts: 4533
Joined: Mon Aug 13, 2007 8:06 pm
Location: BC Canada

Re: Hoops for 19010 Elite Ergo 3 Embroidery Machine

New postby analacana on Thu Nov 18, 2010 4:38 pm

Thank you Laura and Marty. I have pretty much mastered the splitting but it certainly is time consuming. I am trying to convince my significant other to help me in investing for a newer machine. We went to a Janome dealer and learned that they have a newer machine but we are looking at a Viking Diamond. It should be a significant step forward from my trusty Elite 19010. I wonder how I might be able to sell the Elite. Do you all have experience with that? Thanks
analacana
 
Posts: 0
Joined: Wed Nov 17, 2010 6:33 pm

Re: Hoops for 19010 Elite Ergo 3 Embroidery Machine

New postby bridesmom on Thu Nov 18, 2010 8:30 pm

I did a trade in on mine and got basically nothing for it. Unless you can sell it locally in the newspaper. Or Craigs List.
Laura
Go Canucks!
Asking a quilter to mend something is like asking Picasso to paint your garage
User avatar
bridesmom
2008/2009 Stash Challenge Winner
2008/2009 Stash Challenge Winner
 
Posts: 4533
Joined: Mon Aug 13, 2007 8:06 pm
Location: BC Canada

Re: Hoops for 19010 Elite Ergo 3 Embroidery Machine

New postby googlegurl on Sat Jan 10, 2015 11:41 am

Janome hoops will indeed fit this machine (I know because I have one) There is also a yahoo group for this sewing machine that is really great. Very active member roster. Lots of information, tutorials, manuals etc. I strongly recommend it. The max size on our machine is actually like 5 x 4. I have the original large round hoop, but I purchased a janome rectangle f hoop because it uses less stabilizer. Hope to see you in Yahoo group.

Judy
Virginia
googlegurl
 
Posts: 3
Joined: Sat Nov 06, 2010 7:27 pm



Return to Embroidery Machines


Who is online

Users browsing this forum: No registered users and 1 guest

cron